Filters
Question type

What type of op- amp circuit does not typically have a feedback path connected between its output and either of its input pins?


A) A current multiplier
B) An open- loop amplifier
C) An inverter
D) A comparator

E) A) and B)
F) B) and C)

Correct Answer

verifed

verified

One disadvantage of the tracking A/D converter is ________.


A) the need for an accurate clock reference for the counter
B) the binary output will oscillate between two binary states when the analog input is constant
C) the need for a latch and its associated control circuit
D) it requires two counters: one for up and one for down

E) B) and D)
F) A) and B)

Correct Answer

verifed

verified

A digital- to- analog (D/A) converter changes data like temperature variations into digital quantities.

A) True
B) False

Correct Answer

verifed

verified

The DSP, unlike the general- purpose microprocessor, must typically process data in real time; that is, as it happens.

A) True
B) False

Correct Answer

verifed

verified

True

An analog- to- digital converter (ADC) has a four- bit output. How many analog values can it represent?


A) 4
B) 0.0625
C) 1/4
D) 16

E) A) and B)
F) A) and C)

Correct Answer

verifed

verified

Quantization is performed by a(n) D) packets.


A) DAC
B) DSP
C) ADC
D) Filter

E) A) and C)
F) All of the above

Correct Answer

verifed

verified

C

What advantage does the R/2R ladder DAC have over a binary- weighted- input DAC?


A) The virtual ground is eliminated and the circuit is therefore easier to understand and troubleshoot.
B) It uses only two different resistor values.
C) It is much easier to analyze its operation.
D) It has fewer parts for the same number of inputs.

E) None of the above
F) C) and D)

Correct Answer

verifed

verified

B

An analog quantity varies from 0- 7 V and is input to a 6- bit A/D converter. What analog value is represented by each step on the digital output?


A) 0.109 V
B) 0.111 V
C) 0.857 V
D) 1.17 V

E) A) and B)
F) A) and C)

Correct Answer

verifed

verified

The highest frequency component of the analog signal in an ADC is known as theD) packets.


A) Shannon frequency
B) Nyquest frequency
C) Aliasing frequency
D) Sampling frequency

E) None of the above
F) B) and D)

Correct Answer

verifed

verified

When the analog input to a tracking A/D converter is at a constant level, the digital output will oscillate.

A) True
B) False

Correct Answer

verifed

verified

DSP applications include ________.


A) telecommunications
B) radar
C) speech generation
D) all of the above

E) A) and C)
F) None of the above

Correct Answer

verifed

verified

The main advantage that a tracking A/D converter has over a stairstep- ramp A/D converter is that it ________.


A) uses an up/down counter to allow it to measure both positive and negative voltages
B) is faster
C) does not require a counter
D) uses an up/down counter to indicate the polarity of the input voltage

E) A) and B)
F) C) and D)

Correct Answer

verifed

verified

Digital Signal Processing is the processing of analog signals by conversion to digital form.

A) True
B) False

Correct Answer

verifed

verified

Refer to the figure below. What should the display on the scope look like if the A/D converter is working properly? Refer to the figure below. What should the display on the scope look like if the A/D converter is working properly?   A)  The pattern should be a straight line across the screen due to the equal but opposite voltages being applied to the scope inputs. B)  The scope should display a sequential binary count with the LSB being on the left and the MSB on the right side of the display. C)  A uniform stairstep pattern should be displayed. D)  It should be a circular Lissajous pattern resulting from the simultaneous application of ramps to the vertical and horizontal inputs of the oscilloscope.


A) The pattern should be a straight line across the screen due to the equal but opposite voltages being applied to the scope inputs.
B) The scope should display a sequential binary count with the LSB being on the left and the MSB on the right side of the display.
C) A uniform stairstep pattern should be displayed.
D) It should be a circular Lissajous pattern resulting from the simultaneous application of ramps to the vertical and horizontal inputs of the oscilloscope.

E) B) and C)
F) A) and D)

Correct Answer

verifed

verified

Which of the equations below expresses the voltage gain relationship for an operational amplifier?


A) Vout/Vin = - Rf/Rin
B) Vin/Vout = Rout/Rin
C) Vout = Vin/Av
D) Vout/Vin = Rout/Rin

E) C) and D)
F) All of the above

Correct Answer

verifed

verified

What is the main disadvantage of the stairstep- ramp A/D converter?


A) It requires a precision clock in order for the conversion to be reliable.
B) It requires a counter.
C) The counter must count up from zero at the beginning of each conversion sequence, so the conversion time varies with the input voltage.
D) All of the above are correct.

E) B) and C)
F) A) and B)

Correct Answer

verifed

verified

DSP applications include ________.


A) image processing
B) music processing
C) filtering
D) all of the above

E) C) and D)
F) A) and D)

Correct Answer

verifed

verified

The figure below represents a _________. The figure below represents a _________.   A)  tracking A/D converter B)  successive- approximation A/D converter C)  dual- approximation D/A comparator D)  dual- slope A/D converter


A) tracking A/D converter
B) successive- approximation A/D converter
C) dual- approximation D/A comparator
D) dual- slope A/D converter

E) A) and B)
F) A) and C)

Correct Answer

verifed

verified

Sigma- Delta ADC utilizes ________.


A) a one- bit quantization method
B) quantized difference between two samples
C) delta modulation
D) all of the above

E) A) and D)
F) All of the above

Correct Answer

verifed

verified

What function is performed by the block labeled 'X' in the figure below? What function is performed by the block labeled 'X' in the figure below?   A)  Power supply for the audio amplifier B)  Analog- to- digital conversion C)  Audio ON/OFF control D)  Digital- to- analog conversion


A) Power supply for the audio amplifier
B) Analog- to- digital conversion
C) Audio ON/OFF control
D) Digital- to- analog conversion

E) C) and D)
F) A) and D)

Correct Answer

verifed

verified

Showing 1 - 20 of 46

Related Exams

Show Answer